Built tough for Texas weather. We build board-on-board cedar privacy fences, ornamental wrought iron, and automated driveway gates engineered to withstand high winds and expansive clay soils.
Complete on-site measurement, property line review & itemized quote.
Built specifically to survive extreme North Texas wind gusts, high humidity, sun exposure, and shifting clay soil.
The ultimate North Texas privacy standard. Overlapping picket construction ensures total visual privacy even as wood naturally expands and contracts.
Heavy-duty, powder-coated architectural iron fencing for residential properties, swimming pool enclosures, perimeter borders, and greenbelts.
Custom sliding, swinging, and cantilever entry gates equipped with heavy-duty LiftMaster commercial gate openers and mobile smartphone access.
Industrial perimeter security fencing for commercial yards, sports complexes, retention ponds, and distribution hubs across DFW.
North Texas severe convective storms blow down dozens of rotted wooden posts each season. We provide rapid insurance documentation and tear-offs.
Protect your investment against ultraviolet solar degradation, gray oxidation, mildew, and rainwater intrusion with contractor-grade penetrating oil stains.
Why experienced DFW homeowners choose genuine Western Red Cedar and steel posts over cheap builder-grade materials.
| Feature / Specification | Builder-Grade Treated Pine | Common Spruce / White Fir | Western Red Cedar (Recommended) |
|---|---|---|---|
| Resistance to Texas Sun Warping | Poor (Shrinks, twists & bows within 18 mos) | Very Low (Cracks quickly) | Excellent (Natural pitch & dimensional stability) |
| Post Foundation | Wooden 4x4 (Rots at ground level) | Wooden 4x4 (Snaps in windstorms) | Schedule 40 Galvanized Steel (36" in concrete) |
| Fastener Standard | Electro-galvanized nails (Black streaks) | Standard steel staples | Stainless Steel Ring-Shank (Zero staining) |
| Average DFW Lifespan | 5 – 8 Years | 4 – 7 Years | 18 – 25+ Years |
| Natural Bug & Termite Resistance | Chemical immersion only | None | High (Natural aromatic thujaplicin oils) |
From Texas 811 utility marking to post-concrete curing, we handle every phase with pinpoint precision.
We measure linear footage, establish property corners, and coordinate Texas811 utility locates for underground gas, electric, and water lines.
We safely remove and haul away your old fence, pulling up rotted wooden posts and cleaning the fenceline down to the grade.
We auger 36-inch deep holes to reach solid ground beneath shifting surface clay, setting heavy galvanized steel posts in commercial concrete.
We frame 2x4 cedar horizontal rails, install heavy 2x6 pressure-treated rot boards against the soil, and nail cedar pickets with stainless fasteners.
We build steel-framed sag-proof gates, install commercial hardware, run magnetic sweeps for stray fasteners, and perform a final walk-through.
Every city across the DFW metroplex maintains unique fence height and setback guidelines (such as strict 8ft rear fence requirements and front corner visibility triangles). We prepare all elevation drawings and permit paperwork for you.
Local installation and post-setting crews stationed throughout the metroplex ready for prompt dispatch.
Custom cedar privacy fences, steel gate operators, and alley replacement across central Dallas.
Board-on-board cedar installations, steel post conversions, and wrought iron fences across Fort Worth and the Mid-Cities.
Upscale 8-foot board-on-board cedar fencing with top cap and pre-staining for master-planned neighborhoods.
Residential backyard privacy fencing, iron pool guards, and ranch gates across Denton and Lake Lewisville areas.
Lakefront ornamental iron borders and wind-resistant privacy cedar fencing east of Dallas.
Acreage pipe fencing, no-climb horse wire, and suburban privacy fences south and west of the metroplex.
Over 240+ 5-star reviews across Google, BBB, and Angi throughout the Dallas–Fort Worth area.
"Our old spruce fence in Frisco blew down during a severe thunderstorm. DFW Fence Contractors replaced 210 linear feet with 8ft board-on-board Western Red Cedar on steel posts. The craftsmanship, trim, and gate alignment are impeccable!"
"Installed an automatic sliding iron driveway gate and side privacy fence in Fort Worth. LiftMaster motor connects right to our smartphones. Outstanding communication and clean installation."
"Replaced our HOA perimeter fence in Plano. Handled the city permits and architectural review board smoothly. Every steel post was set deep in solid concrete. Truly built to last."
Everything you need to know about post depth, wood grades, permits, and gate automation.
Western Red Cedar has natural oils that protect against rotting, insect damage, and extreme North Texas sun exposure. While pressure-treated pine shrinks, cups, and splits under 100°F+ Texas summers, cedar remains straight and true for decades.
Dallas-Fort Worth is notorious for expansive black clay soils that swell in winter rains and shrink drastically in summer droughts. Shallow posts (18–24 inches) quickly lean or heave. Our 36-inch deep augered holes anchor into stable substrate below the soil moisture shift line.
Most standard residential backyard fences (150 to 300 linear feet) are fully completed in 2 days. Day 1 consists of tear-off, post hole drilling, and setting steel posts in concrete. Day 2 involves framing horizontal 2x4 rails, rot boards, pickets, custom gates, and magnetic nail sweeps.
Yes, absolutely. Prior to drilling any post holes, we submit utility locate tickets to Texas811 to have public gas lines, power conduits, and telecommunication cables professionally marked with paint and flags.
Providing rapid-response on-site fence measurement crews dispatching daily across Dallas, Tarrant, Collin, and Denton counties.